Handling Spatial Projection & CRS in R
Overview
Teaching: 40 min
Exercises: 20 minQuestions
What do I do when vector data don’t line up?
Objectives
Plot vector objects with different CRSs in the same plot.
Things You’ll Need To Complete This Episode
See the lesson homepage for detailed information about the software, data, and other prerequisites you will need to work through the examples in this episode.
In an earlier episode we learned how to handle a situation where you have two different files with raster data in different projections. Now we will apply those same principles to working with vector data. We will create a base map of our study site using United States state and country boundary information accessed from the United States Census Bureau. We will learn how to map vector data that are in different CRSs and thus don’t line up on a map.
We will continue to work with the three shapefiles that we loaded in the Open and Plot Shapefiles in R episode.
Working With Spatial Data From Different Sources
We often need to gather spatial datasets from different sources and/or data that cover different spatial extents. These data are often in different Coordinate Reference Systems (CRSs).
Some reasons for data being in different CRSs include:
- The data are stored in a particular CRS convention used by the data provider (for example, a government agency).
- The data are stored in a particular CRS that is customized to a region. For instance, many states in the US prefer to use a State Plane projection customized for that state.
Notice the differences in shape associated with each different projection. These differences are a direct result of the calculations used to “flatten” the data onto a 2-dimensional map. Often data are stored purposefully in a particular projection that optimizes the relative shape and size of surrounding geographic boundaries (states, counties, countries, etc).
In this episode we will learn how to identify and manage spatial data in different projections. We will learn how to reproject the data so that they are in the same projection to support plotting / mapping. Note that these skills are also required for any geoprocessing / spatial analysis. Data need to be in the same CRS to ensure accurate results.
We will continue to use the sf
and raster
packages in this episode.
Import US Boundaries - Census Data
There are many good sources of boundary base layers that we can use to create a basemap. Some R packages even have these base layers built in to support quick and efficient mapping. In this episode, we will use boundary layers for the contiguous United States, provided by the United States Census Bureau. It is useful to have shapefiles to work with because we can add additional attributes to them if need be - for project specific mapping.
Read US Boundary File
We will use the st_read()
function to import the
/US-Boundary-Layers/US-State-Boundaries-Census-2014
layer into R. This layer
contains the boundaries of all contiguous states in the U.S. Please note that
these data have been modified and reprojected from the original data downloaded
from the Census website to support the learning goals of this episode.
state_boundary_US <- st_read("data/NEON-DS-Site-Layout-Files/US-Boundary-Layers/US-State-Boundaries-Census-2014.shp")
Reading layer `US-State-Boundaries-Census-2014' from data source `/home/travis/build/datacarpentry/r-raster-vector-geospatial/_episodes_rmd/data/NEON-DS-Site-Layout-Files/US-Boundary-Layers/US-State-Boundaries-Census-2014.shp' using driver `ESRI Shapefile'
Simple feature collection with 58 features and 10 fields
geometry type: MULTIPOLYGON
dimension: XYZ
bbox: xmin: -124.7258 ymin: 24.49813 xmax: -66.9499 ymax: 49.38436
z_range: zmin: 0 zmax: 0
CRS: 4326
Next, let’s plot the U.S. states data:
ggplot() +
geom_sf(data = state_boundary_US) +
ggtitle("Map of Contiguous US State Boundaries") +
coord_sf()
U.S. Boundary Layer
We can add a boundary layer of the United States to our map - to make it look
nicer. We will import
NEON-DS-Site-Layout-Files/US-Boundary-Layers/US-Boundary-Dissolved-States
.
country_boundary_US <- st_read("data/NEON-DS-Site-Layout-Files/US-Boundary-Layers/US-Boundary-Dissolved-States.shp")
Reading layer `US-Boundary-Dissolved-States' from data source `/home/travis/build/datacarpentry/r-raster-vector-geospatial/_episodes_rmd/data/NEON-DS-Site-Layout-Files/US-Boundary-Layers/US-Boundary-Dissolved-States.shp' using driver `ESRI Shapefile'
Simple feature collection with 1 feature and 9 fields
geometry type: MULTIPOLYGON
dimension: XYZ
bbox: xmin: -124.7258 ymin: 24.49813 xmax: -66.9499 ymax: 49.38436
z_range: zmin: 0 zmax: 0
CRS: 4326
If we specify a thicker line width using size = 2
for the border layer, it will
make our map pop! We will also manually set the colors of the state boundaries
and country boundaries.
ggplot() +
geom_sf(data = country_boundary_US, color = "gray18", size = 2) +
geom_sf(data = state_boundary_US, color = "gray40") +
ggtitle("Map of Contiguous US State Boundaries") +
coord_sf()
Next, let’s add the location of a flux tower where our study area is. As we are adding these layers, take note of the CRS of each object. First let’s look at the CRS of our tower location object:
st_crs(point_HARV)
Coordinate Reference System:
User input: 32618
wkt:
PROJCS["WGS_1984_UTM_Zone_18N",
GEOGCS["GCS_WGS_1984",
DATUM["WGS_1984",
SPHEROID["WGS_84",6378137,298.257223563]],
PRIMEM["Greenwich",0],
UNIT["Degree",0.017453292519943295],
AUTHORITY["EPSG","4326"]],
PROJECTION["Transverse_Mercator"],
PARAMETER["latitude_of_origin",0],
PARAMETER["central_meridian",-75],
PARAMETER["scale_factor",0.9996],
PARAMETER["false_easting",500000],
PARAMETER["false_northing",0],
UNIT["Meter",1],
AUTHORITY["EPSG","32618"]]
Our project string for DSM_HARV
specifies the UTM projection as follows:
+proj=utm +zone=18 +datum=WGS84 +units=m +no_defs +ellps=WGS84 +towgs84=0,0,0
- proj=utm: the projection is UTM, UTM has several zones.
- zone=18: the zone is 18
- datum=WGS84: the datum WGS84 (the datum refers to the 0,0 reference for the coordinate system used in the projection)
- units=m: the units for the coordinates are in METERS.
- ellps=WGS84: the ellipsoid (how the earth’s roundness is calculated) for the data is WGS84
Note that the zone
is unique to the UTM projection. Not all CRSs
will have a
zone.
Let’s check the CRS of our state and country boundary objects:
st_crs(state_boundary_US)
Coordinate Reference System:
User input: 4326
wkt:
GEOGCS["GCS_WGS_1984",
DATUM["WGS_1984",
SPHEROID["WGS_84",6378137,298.257223563]],
PRIMEM["Greenwich",0],
UNIT["Degree",0.017453292519943295],
AUTHORITY["EPSG","4326"]]
st_crs(country_boundary_US)
Coordinate Reference System:
User input: 4326
wkt:
GEOGCS["GCS_WGS_1984",
DATUM["WGS_1984",
SPHEROID["WGS_84",6378137,298.257223563]],
PRIMEM["Greenwich",0],
UNIT["Degree",0.017453292519943295],
AUTHORITY["EPSG","4326"]]
Our project string for state_boundary_US
and country_boundary_US
specifies
the lat/long projection as follows:
+proj=longlat +datum=WGS84 +no_defs +ellps=WGS84 +towgs84=0,0,0
- proj=longlat: the data are in a geographic (latitude and longitude) coordinate system
- datum=WGS84: the datum WGS84 (the datum refers to the 0,0 reference for the coordinate system used in the projection)
- ellps=WGS84: the ellipsoid (how the earth’s roundness is calculated) is WGS84
Note that there are no specified units above. This is because this geographic coordinate reference system is in latitude and longitude which is most often recorded in decimal degrees.
Data Tip
the last portion of each
proj4
string is+towgs84=0,0,0
. This is a conversion factor that is used if a datum conversion is required. We will not deal with datums in this episode series.
CRS Units - View Object Extent
Next, let’s view the extent or spatial coverage for the point_HARV
spatial
object compared to the state_boundary_US
object.
First we’ll look at the extent for our study site:
st_bbox(point_HARV)
xmin ymin xmax ymax
732183.2 4713265.0 732183.2 4713265.0
And then the extent for the state boundary data.
st_bbox(state_boundary_US)
xmin ymin xmax ymax
-124.72584 24.49813 -66.94989 49.38436
Note the difference in the units for each object. The extent for
state_boundary_US
is in latitude and longitude which yields smaller numbers
representing decimal degree units. Our tower location point is in UTM, is
represented in meters.
Proj4 & CRS Resources
- Official PROJ library documentation
- More information on the proj4 format.
- A fairly comprehensive list of CRSs by format.
- To view a list of datum conversion factors type:
projInfo(type = "datum")
into the R console.
Reproject Vector Data or No?
We saw in an earlier episode that when working with raster
data in different CRSs, we needed to convert all objects to the same
CRS. We can do the same thing with our vector data - however, we
don’t need to! When using the ggplot2
package, ggplot
automatically converts all objects to the same CRS before plotting.
This means we can plot our three data sets together
without doing any conversion:
ggplot() +
geom_sf(data = country_boundary_US, size = 2, color = "gray18") +
geom_sf(data = state_boundary_US, color = "gray40") +
geom_sf(data = point_HARV, shape = 19, color = "purple") +
ggtitle("Map of Contiguous US State Boundaries") +
coord_sf()
Challenge - Plot Multiple Layers of Spatial Data
Create a map of the North Eastern United States as follows:
- Import and plot
Boundary-US-State-NEast.shp
. Adjust line width as necessary.- Layer the Fisher Tower (in the NEON Harvard Forest site) point location
point_HARV
onto the plot.- Add a title.
- Add a legend that shows both the state boundary (as a line) and the Tower location point.
Answers
NE.States.Boundary.US <- st_read("data/NEON-DS-Site-Layout-Files/US-Boundary-Layers/Boundary-US-State-NEast.shp")
Reading layer `Boundary-US-State-NEast' from data source `/home/travis/build/datacarpentry/r-raster-vector-geospatial/_episodes_rmd/data/NEON-DS-Site-Layout-Files/US-Boundary-Layers/Boundary-US-State-NEast.shp' using driver `ESRI Shapefile' Simple feature collection with 12 features and 9 fields geometry type: MULTIPOLYGON dimension: XYZ bbox: xmin: -80.51989 ymin: 37.91685 xmax: -66.9499 ymax: 47.45716 z_range: zmin: 0 zmax: 0 CRS: 4326
ggplot() + geom_sf(data = NE.States.Boundary.US, aes(color ="color"), show.legend = "line") + scale_color_manual(name = "", labels = "State Boundary", values = c("color" = "gray18")) + geom_sf(data = point_HARV, aes(shape = "shape"), color = "purple") + scale_shape_manual(name = "", labels = "Fisher Tower", values = c("shape" = 19)) + ggtitle("Fisher Tower location") + theme(legend.background = element_rect(color = NA)) + coord_sf()
Key Points
ggplot2
automatically converts all objects in a plot to the same CRS.Still be aware of the CRS and extent for each object.